Smart Charger for 9.6 volt - 18 volt Nickel-Metal Hydride and Nickel Cadmium battery packs.

Model: H02400918-US-1, CH-UN180

• This Universal Fast & Smart Charger is designed for charging NiMH / NiCad battery packs from 9.6V - 18V (9 to 15 cell packs)
• Excellent for 12V , 13.2V and 14.4V bikelight NiMH batteries pack. 
• Just plug in and wait for the battery to charge. Red LED indicates charging, and Green LED means fully charged 
• 120-240V AC input for worldwide use.
• Detects battery pack voltage and sets proper charging voltage automatically 
• Cuts off power automatically using negative delta V IC when battery pack is fully charged. 
• Built in IC protects battery from high-current, short circuit & reverse polarity. 
• One temperature sensor outlet (Female BEC connector) is installed with the charger double protect the battery from overcharge conditions. 
• Two charging levels, 0.9A and 1.8A, are selectable by a switch for both high capacity ( >1800mAh) and low capacity battery pack ( <1800mAh) 
• For battery packs between 1800mah and 900 mah, use the low level switch - charging rate: 0.9A 
• For battery packs over 1800mAh, use the high level switch - charging rate: 1.8A

This charger includes: 
1. One standard 2 pin male universal connector with 12" length cable installed with the charger 
2. One 5' cable with female connector and two alligator clips which allow you to connect a battery pack to the smart charger. 
3. One temperature sensor ( 70 deg C thermister ) is included. It must be plugged to battery charger and be attached to battery pack before charging to protect battery overheating. It will cut-off power if battery temperature is over 70 deg C.

ONLY 4 LEFT AT THIS PRICE